Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer

Introduction

Our kit includes all the standard parts required to build a Mini Kossel, plus many extras including an LCD controller and SD-card slot for true stand-alone printing without a PC. All wires are cut to size and made up with plugs and connectors - no soldering or crimping is required. The RAMPS electronics are concealed in the base for neatness and portability, and power and USB cables (supplied) plug in on the side. The ball-ended carbon-fiber diagonal rods which are critical to print quality are accurately pre-assembled by us on a purpose-made jig. You can buy the complete kit here: http://www.HKBay.com Specifications for the standard machine are at http://reprap.org/wiki/Kossel

Dozuki System

Member since: 09/24/2009

1 Reputation

11 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,072