Our kit includes all the standard parts required to build a Mini Kossel, plus many extras including an LCD controller and SD-card slot for true stand-alone printing without a PC. All wires are cut to size and made up with plugs and connectors - no soldering or crimping is required. The RAMPS electronics are concealed in the base for neatness and portability, and power and USB cables (supplied) plug in on the side. The ball-ended carbon-fiber diagonal rods which are critical to print quality are accurately pre-assembled by us on a purpose-made jig. You can buy the complete kit here: http://www.HKBay.com Specifications for the standard machine are at http://reprap.org/wiki/Kossel
No tools specified.
Unpack the kit and check that all parts have been supplied and none have been damaged during shipping. To help you with this, each box or bag will have its own packing label. There is also a list of materials at the end of these instructions in Appendix A.
Embed this guide
Choose a size and copy the code below to embed this guide as a small widget on your site / forum.