Skip to main content

Site Navigation

Your Account

Choose Language

Changes to C - Top Frame Assembly Introduction

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged
Category
[ ]Assembly Instructions for HKBay.com Mini Kossel 3D Delta Printer
Type
[ ]how-to
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Moderate
Author
Public
No

Tools

  • Hex key; ball ended, long arm, 2.5mm x1 added.
  • Needle-nose pliers, small x1 added.

Parts

  • top brackets x3 added.
  • short Alu frame profiles x3 added.
  • M3x8 screws x12 added.
  • t-slot nuts x12 added.
  • M3x25 screws x3 added.
  • M3 washers (small inner diameter) x9 added.
  • F623ZZ flanged bearings x6 added.
  • M3 standard nuts (NOT nyloc nuts) x3 added.
  • belts x3 added.