Skip to main content

Site Navigation

Your Account

Choose Language

Changes to K – Wiring and Electronics Introduction

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged
Category
[ ]Assembly Instructions for HKBay.com Mini Kossel 3D Delta Printer
Type
[ ]how-to
Title
[ ]K Wiring and Electronics
Time Required Min
No estimate
Time Required Max
No estimate
Imageid
Before
After
Difficulty
Moderate
Author
Public
No

Tools

  • Hex key; ball ended, long arm, 2.5mm x1 added.

Parts

  • Arduino Mega (blue) x1 added.
  • RAMPS board (red) x1 added.
  • glass tabs x3 added.
  • retractor x1 added.
  • M3x8 screws x4 added.
  • t-slot nuts x4 added.
  • LCD Display assembly x1 added.
  • LCD ribbon cable (already in the base) x2 added.
  • LCD frame x1 added.
  • LCD holder x2 added.
  • M3x16 screws x4 added.