Skip to main content

Site Navigation

Your Account

Choose Language

Changes to F - Z-Probe Assembly Introduction

Edit by HKBay

Edit approved by HKBay

Before
After
Unchanged
Category
[ ]Assembly Instructions for HKBay.com Mini Kossel 3D Delta Printer
Type
[ ]how-to
Title
[ ]6 - Z-Probe Assembly
Time Required Min
30 minutes
Time Required Max
30 minutes
Imageid
Before
After
Difficulty
Moderate
Author
Public
No

Tools

  • Hex key; ball ended, long arm, 2.5mm x1 added.
  • Hex key; ball ended, 2.0mm x1 added.
  • Wire Cutters x1 added.

Parts

  • Z-probe holder x1 added.
  • Z-probe micro-switch with 4 cables x1 added.
  • 1.5mm hex key with heat-shrink tube x1 added.
  • safety-pin x1 added.
  • spring x1 added.
  • terminal block x1 added.
  • M2.5x12 screws x3 added.
  • heat-shrink tube x1 added.

Flags

  • In Progress added.

Steps

Step #: 1
Before
After