Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by HKBay

Edit approved by HKBay

Before
After
Unchanged

Step Lines

[* icon_note] If your kit was delivered with open timing belts (i.e. XL kit), the connection to the carriages is a bit different; loop the two ends of the belts around the upper and lower plastic plugs on the carriages, tension them a bit and then secure each of them with a ziptie (see picture).
[* icon_caution] Check again that the belt is properly engaged on the motor pulley and properly looped over the top bearings, then repeat for the other 2 belts.

Image 1

No previous image

Added