Changes to Step #3
Step Lines
[title] Hot-end wiring, spool holder and LCD screen |
[* black] Zip-tie the cables and PTFE tube from the effector at equal intervals and route them to the RAMPS board in the bottom frame. |
[* black] Fit spool holder to the top frame between Y and Z tower. |
[* black] Connect the two flat cables with the LCD screen and assemble the screen, frame and the two LCD panel holders with the help of 4 M3x16 screws. |
[* icon_caution] Note which of the cables is EXP1 and which is EXP2! |
Image 1
No previous image
Added
Image 2
No previous image
Added