Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by HKBay

Edit approved by HKBay


Step Lines

[title] Connect End-Stops (continued)
[* black] If not already done in the step above, connect the X, Y, Z, and E motors as shown. There are 2 rows of pins for Z- you can use the either one.
[* icon_caution] Unlike shown on the picture, the green cables from the four motors need to face TOWARDS the green power plug!
[* black] Connect the hot-end to the + and- pins Marked D10 on the RAMPS board.
[* icon_note] The hot-end wires are not polarized.

Image 1

No previous image


Image 2

No previous image