Changes to Step #3
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
[* icon_caution] Before continuing, place the two LCD flat cables between the two profiles! Only then add a second bracket to the other end of the two profiles. |
[* black] Then add third and fourth profiles to one of the brackets and place the USB cable between these two profiles. |
[* icon_caution] The flat USB connector should face outwards, the square connector into the triangle. |
[* black] Then add the third bracket and lastly, add the last two profiles to two brackets in order to complete the triangle. |
[* icon_reminder] Make again sure that all the t-slot nuts have connected properly with the profiles. This is crucial for the future stability and rigidity of your printer! |
Image 1
No previous image
Added
Image 2
No previous image
Added