Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Dozuki System

Edit approved by Dozuki System


Step Lines

[* icon_caution] Before inserting the hex key, please make sure that it’s straight as an arrow. If it’s slightly bent, try to bend it as straight as possible.
[* black] Then insert the hex key into its groove/hole from above.
[* icon_note] Ensure it moves freely and smoothly through the hole - if it doesn’t, enlarge the hole and the slot and/or use some lubricant.
[* icon_caution] If necessary, cut the heat shrink tube near the bend in the hex key, so that it does not touch the plastic holder or the micro-switch anywhere!

Image 1

No previous image