Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[* black] Then fit the hot-end to the fan assembly. Place the fan flat on the table and push the hot-end from the top all the way into the groove.
[* icon_note] It is important that the hot-end sits all the way inside the groove as otherwise the holes will not align with the effector plate later!
[* icon_caution] Make sure you do not press against the fan blades!

Image 1

No previous image

Added