Changes to Step #8
Edit by Dozuki System —
Edit approved by Dozuki System
- Before
- After
- Unchanged
Step Lines
[title] Connect End-Stops (continued) |
[* black] Followed by the Y-endstop on row 4 (Y-max) |
[* black] Leave row 3 (Y-min) empty and finish with the X-endstop on row 2 (X-max). |
[* black] Connect the hot-end thermistor cable (white) to the first pair of thermistor pins labeled T0. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added