Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Dozuki System

Edit approved by Dozuki System

Before
After
Unchanged

Step Lines

[title] Connect LCD Board
[* black] Fit the LCD controller ribbon cables to the connector board and the board to AUX3 and AUX4 on the RAMPS board.
[* icon_caution] Make sure EXP1 und EXP2 go into their respective connectors!
[* icon_reminder] This concludes the basic wiring. You can tidy it up later, after commissioning, once it is all confirmed as working.

Image 1

No previous image

Added