Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by HKBay

Edit approved by HKBay

Before
After
Unchanged

Step Lines

[* black] Before continuing, place the two LCD flat cables between the two profiles! Only then add a second bracket to the other end of the two profiles. Then add third and fourth profiles to one of the brackets and place the USB cable between these two profiles. The flat USB connector should face outwards, the square connector into the triangle.
[* black] New line.ThenThen add the third bracket and lastly, add the last two profiles to two brackets in order to complete the triangle. Make again sure that all the t-slot nuts have connected properly with the profiles. This is crucial for the future stability and rigidity of your printer!
[* black] New line.ThenThen add the third bracket and lastly, add the last two profiles to two brackets in order to complete the triangle. Make again sure that all the t-slot nuts have connected properly with the profiles. This is crucial for the future stability and rigidity of your printer!