Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #1

Edit by HKBay

Edit approved by HKBay


Step Lines

[title] Remove the support material
[* black] Use flat-nodes pliers, utility knife, file etc. to remove the temporary support in the extruder gap, place the 625 bearing in this slot and screw in the M5 screw/nut to hold in place. Use a sharp knife and/or a file to remove all remaining plastics until the bearing fits in tight but can run smoothly and freely.
[* icon_caution] Do not over-tighten the bolt.

Image 1

No previous image


Image 2

No previous image