Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by HKBay

Edit approved by HKBay

Before
After
Unchanged

Step Lines

[* black] Then fit extruder-holder to the back of Z-tower (opposite the LCD cables).
[* icon_note] As the t-slot nuts are too close together, they need to be slid into the profile from the top, before attaching the top frame!
[* black] Attach the motor to the extruder holder with two M3x16 screws and standard nuts, cables pointing towards the tower.
[* icon_note] Mount the extruder at about the same level as the lower endstop holder.

Image 1

No previous image

Added