Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Attach the spider to the sliding rails with each two M3x16 on top and two M3x8 screws on bottom.

Carriages must face downwards (see picture).

Adjust the spider in such a way that the fan points forward towards X and the Z-Probe towards Z tower!

Fit the PTFE tube into the extractor and tighten the brass connector.

Make sure the brass connector goes in at a right angle. Use 10mm Allen Key, but don’t over-tighten!

Oil the rails with high-quality oil.

Your contributions are licensed under the open source Creative Commons license.