Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

First, attach one of the plastic endstop holders to each of the corner extrusions so that the top of the endstop holder is approx. 100mm away from the top of the base assembly.

It’s not so important that they are EXACTLY 100mm away from the base. What’s much more important is that all 3 are EXACTLY the same distance away from base distance and that they are positioned perfectly horizontal (not like the picture)! This is crucial for the accuracy of your printer.

Your contributions are licensed under the open source Creative Commons license.